Dalton Clutch Kit 2020-23 Polaris General XP/XP4 (XP versions only)

$499.99

30-32” tires. Adjustable kit for tires, terrains.
0-3000’ elevation, with adjustments for “occasional visit” to mid-elevations (4000 – 6000’).
 
 
Note: For 33-34” tires use kit part number DUV P10GX-2 or order the optional secondary spring DPSS-B/R-T. Adjustment notes are included in Dalton’s instructions for the use of the optional spring and those tires.

 

Guaranteed Safe Checkout

2020 General XP models have larger tires from factory, different final drive ratios, and different clutching from factory than the regular General.

Dalton’s XP model also has no EBS engine braking from factory and uses the same belt as the RZR1000 XP.

Dalton has re-calibrated the rate of shift on this vehicle even for stock tires, as they quickly recognised factory clutch calibration could use improvement.

They also noticed that the belt was often slapping the outer cover shroud on deceleration and the vehicle exhibited poor back shifting of the belt when the vehicle senses load from soft terrain or hills.

This Dalton clutch kit is very different from other kits they have, and a new set of springs and helix was required. Their kit incorporates just a slight bit of EBS at low speed (not as aggressive like factory Engine braking on older versions), and engagement rpm similar to stock. This Dalton clutch kit also offers adjustability for correct shift pattern and “rate of shift of the belt” for different tire sizes and situations, improved belt grip, and improves overall response and back shifting of the belt. Improved back shifting means that the belt quickly gets into the correct ratio on the clutches when the vehicle senses load. With good back shifting, there is less slippage and heat created, and thus improved belt life.

Hardened billet steel Dalton flyweights with High quality bushings, and durable thrust washers on the sides to ensure fluid pivoting motion.

Their flyweights can have part of their mass adjusted via the Dalton “Quick Adjust” method for easy fine tuning if required for certain instances, like tires or trips to elevation, etc. With their quick adjust passage you can add or subtract weight from their flyweight without even removing the flyweight from the clutch at all.

Dalton’s instruction manual tells you exactly how to set up for each size/situation, however there is some variance in the wide ranges of tire weight and size, and terrain types. That’s the benefit a Dalton kit that can easily be adjusted.

Additional information

Weight 5 lbs
Dimensions 10 × 10 × 8 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.